View on GitHub

ROS2-Crash-Course

Hands-on ROS 2 crash course covering ROS fundamentals and robot programming in Python through practical activities with TurtleSim and iRobot Create3.

ROS 2 Crash Course

Welcome to the ROS 2 Crash Course!

This is a hands-on ROS 2 crash course covering ROS fundamentals and robot programming in Python through practical activities with TurtleSim (and optionally with the iRobot Create3).

This course’s page is available at: https://felipenmartins.github.io/ROS2-Crash-Course/.

As the name suggests, this is a crash course. It was designed to give you a quick start and help you gain foundational knowledge to allow you to independently learn new ROS concepts as you need them in the future.

Note: This is a course about ROS 2, not about the fundamentals of robotics. If you are interested in learning more about robotics concepts, check out my Robotics Simulation Labs and accompanying Jupyter Notebooks for learning Mobile Robot Control.

Structure

ROS 2 Crash Course is organized in 2 parts: Part 1 covers core concepts of ROS 2, whereas Part 2 is dedicated to the application of such concepts on the Create3 robot. Part 2 is optional.

The course structure is:

Part 1 - ROS

This part covers fundamental ROS 2 concepts. It can be followed even if you don’t have access to a physical robot.

Part 2 - Create3

This part contains a quick introduction to the iRobot Create3 educational robot using iRobot’s Python Web Playground, followed by activities to practice ROS 2 concepts with the robot.

Intended Learning Outcomes

By the end of this course, you should be able to:

Requirements

Linux command line

This course assumes that you are familiar with the Linux Terminal commands. You don’t need to be an advanced Linux user, but you should know how to:

If you are new to Linux, I recommend the tutorial The Linux command line for beginners, which covers all above topics.

Software

The software requirements for this course are:

Virtual Machine

Preferably, you should have a machine running Ubuntu as main operating system or in dual boot. However, for this course a virtual machine also works.

A guide to create a Virtual Machine with Ubuntu and ROS 2 is available here.

Hardware

The demonstration platform used in this course is the iRobot Create3 educational robot. You do not need any robot hardware to complete Part 1, but a working Create3 robot is required to complete the activities in Part 2.

Acknowledgment

An early version of this course was prepared by Marwan Refaat during a summer internship at Hanze University of Applied Sciences under my supervision. This repository was forked from his original ROSWorkshop and was built on top of his work.

Thank you, Marwan!

License

Just like Marwan’s work, this project is licensed under the terms of the MIT license.